Our specialty
Insurance Restoration Roofing in Los Angeles County
When a roof has been damaged, what gets found, photographed and written down shapes how clearly the loss can be assessed. We evaluate the damage, document it properly, prepare a clear scope, and carry out the restoration.
What “insurance restoration” means in practice
Insurance restoration is roofing work carried out after a covered event — typically wind, water intrusion, falling debris or fire — where the property owner is working with their insurer. It is different from an ordinary re-roof in one important way: the scope has to be justified with evidence.
That evidence is the part most property owners never see, and this documentation often affects how clearly the damage and required scope can be evaluated. A roof can look intact from the street and still have creased shingles, broken seals, cracked tiles, saturated underlayment or a second and third layer of old roofing that makes a proper repair impossible. Our job is to find those conditions, record them and explain them in language an adjuster recognises.
Who we work with
- Homeowners and estate managers after a wind or water event
- HOA boards and community managers with multiple affected buildings
- Commercial property owners and asset managers
- Public adjusters, attorneys and insurance professionals who need a contractor’s evaluation and scope
If you need an independent inspection — for example for a real-estate transaction or a second opinion where you do not want the inspector to be the contractor — that work is done by our affiliate, SoCal Roof Inspections, not by Roofing Solutions.
Three roofing layers identified and labelled during an evaluation
Process
How an insurance-restoration project works with us
Evaluation
Drone imagery of every slope, on-roof inspection of the damaged areas, and — on low-slope roofs — infrared and moisture readings where they add information. We identify the cause of damage, not just its presence.
Documentation
Photographs with location references, measurements, layer counts, material identification and a written description of each condition. This is the file that everyone else in the process will rely on.
Scope and estimate
A line-item scope of the work required to restore the roof to its pre-loss condition, prepared in the industry-standard estimating format that insurers use, including code-required items where they apply.
Coordination
We meet the adjuster on site when asked, answer technical questions, and supply supplementary documentation if the scope needs to be revisited. We do not negotiate your policy — that is between you and your insurer — but we make sure the roof is accurately represented.
Emergency dry-in when needed
If the roof is actively leaking, we tarp and temporarily seal it first. Preventing further damage is usually a policyholder responsibility, and the mitigation is documented too.
Restoration
Repair or replacement carried out to manufacturer specifications and current code, with progress photographs and a final inspection.
What we look for
The details that decide repair versus replacement
- Creased or lifted shingles
- Broken seal strips
- Cracked or displaced tile
- Saturated underlayment
- Multiple roofing layers
- Discontinued materials
- Failed flashings
- Deck damage
Some of these conditions can be repaired. Others — a discontinued shingle that can no longer be matched, or a roof already carrying its maximum number of layers under the building code — cannot be repaired properly, and a like-for-like restoration means replacement. We explain which situation applies to your roof and why.
What wind damage looks like
How we document a claim
What to do after storm damage
What we will and won’t tell you
We will tell you what condition the roof is in, what caused the damage as far as it can be determined, whether a proper repair is possible, and what a full restoration scope looks like.
We won’t tell you that a claim will be approved, that a policy covers something we haven’t read, or that a roof will be replaced for a particular out-of-pocket amount. Coverage decisions belong to your insurer. We also don’t offer to absorb, waive or discount your deductible — treat any contractor who does as a warning sign.
Coverage and claim decisions are made by the insurer under the terms of the policy. Our role is to evaluate the roof, document its condition and complete the approved roofing work.
Commercial and multi-family claims
Low-slope commercial roofs raise their own questions after a storm: was the roof watertight before the event, is the moisture in the insulation new or pre-existing, and does the manufacturer’s warranty still stand? Our maintenance program exists partly to answer those questions in advance — a documented, dated record of the roof’s condition before the storm is the strongest evidence a building owner can have.
Common questions
Do I have to use the contractor my insurer suggests?
An insurer may offer a list of preferred vendors. The California Department of Insurance advises property owners to get written bids from reliable, licensed contractors for the repair work; your own policy sets out the terms that apply, so check it or ask your adjuster if you are unsure. See the department’s Residential Property Claims Guide.
Should I file a claim before you look at the roof?
It usually helps to have the roof evaluated first, so that you know what was found and can describe the damage accurately when you file. If the roof is actively leaking, mitigate first — tarping — and photograph everything.
Will you meet the adjuster?
Yes, when you ask us to. Walking the roof together and pointing to the documented conditions is the most efficient way to resolve technical questions.
Can you help if a claim has already been denied or underpaid?
We can re-evaluate the roof and provide documentation the original inspection may have missed. Whether that changes the insurer’s decision is entirely up to the insurer and, if needed, the appraisal or complaint process available under your policy.
Do you work with public adjusters and attorneys?
Yes. We provide the contractor’s evaluation, scope and photographs; they handle the policy side.