Burbank · Los Angeles County (213) 672-6478 solutions@coreyjpate.com
Roofing Solutions by Corey J Pate
Aerial photograph of a residential roof with damaged areas marked for documentation during an evaluation

Insurance restoration · Process

How We Document Roof Damage for an Insurance Claim

Clear, well-organized documentation helps an adjuster evaluate the conditions found on the roof. Ours is built so that every condition is photographed, located, measured and explained.

What the file contains

  • Aerial overview of every slope — drone photographs establishing the roof’s layout, orientation and overall condition.
  • Marked-up damage locations — each damaged area identified on the overview and cross-referenced to close-up photographs.
  • Close-up evidence — creases, broken seals, cracked tiles, lifted flashings and deck exposure, photographed with a reference for scale.
  • Layer count and material identification — how many roofing layers exist, what they are, and whether the surface product is still manufactured.
  • Measurements — slope areas, pitch, linear footage of ridges, hips, valleys and eaves, and counts of penetrations and flashings.
  • Written narrative — the cause of damage as observed, why a repair is or is not feasible, and code items that apply to a like-for-like restoration.
  • Line-item scope — prepared in the estimating format insurers use, so it can be compared directly with the adjuster’s estimate.
Aerial photograph of a flat commercial roof with inspection findings marked by arrows and labels

Low-slope roof · findings marked during evaluation

Why the layer count matters so much

Southern California roofs are frequently re-covered rather than torn off, and it is common to find two or three generations of roofing on one house. That changes everything about a claim:

  • Building code limits how many layers a roof may carry, so a “repair” that adds material may not be permitted.
  • Fasteners in a repair have to reach the deck through every layer, which is often impractical.
  • Water that has entered the top layer may have been travelling between layers for years — the interior damage is not where the entry point is.

We open the roof at the damaged area, photograph each layer with a label, and include the count in the narrative. It is one of the most frequently overlooked facts in a roof claim.

Low-slope and commercial roofs

On membrane roofs the question is usually moisture in the insulation. Where the roof type allows, we use infrared imaging after sunset to map areas holding heat — a signature of wet insulation — and confirm with a moisture meter and, where needed, a core sample. The result is a moisture map that distinguishes storm-related intrusion from long-standing conditions.

Roof surface opened during an evaluation showing three roofing layers labelled Layer 1, Layer 2 and Layer 3

Three layers labelled in the field

What the documentation is not

It is a contractor’s evaluation and scope, not a coverage opinion, and it is not a promise of any particular outcome. We describe the roof; the insurer interprets the policy and decides the claim. If you want an evaluation that is entirely independent of the contractor who might do the work, our affiliate SoCal Roof Inspections provides that service separately.

Request a damage evaluation

Corey J Pate signatureWritten by Corey J Pate, founder · Roofing experience dating back to 1983

Start with an experienced evaluation of your roof

Leak, ageing roof, storm damage, an insurance question or a commercial re-roof — we'll tell you what condition the roof is in and what your options are. No pressure, no sales pitch.

Call Request Evaluation